Enernova ETA - Safety Instructions; Usage Guidelines

Safety Instructions EN
1.1 Disposal Guide
1. The product contains high voltage AC output, please do not put your
hand or handheld metal conductor into the AC outlet.
2. Do not disassemble the product if you are not professionals because
internal battery and circuit of the product have dangerous high energy
which is able to cause electric shock, short circuit and other dangerous
things to happen.
3. Do not put the product in high temperature environment (more than
50 degrees Celsius) or near the fire to avoid the product from explosion
or catching fire.
4. The product is not a toy. Keep the product out of the reach of chil-
dren
5. Do not use it in a damp environment.
6. Please do not knock or hit the product.
7. Itis strictly forbidden to disassemble the product.
8. Itis strictly forbidden to use products with obvious damage.
9. All parts of the product are environmental friendly and recyclable,
please recycle according to local regulations.
1.2 Usage
1. Please read the specific battery charger manual before use.
2. Please charge with the original adapter or with an adapter that con-
forms to the electrical parameters specified by the manufacturer.
3. Please select the solar panel in accordance with the electrical para-
meters specified by the manufacturer. Itis forbidden to charge with
solar panels whose voltage is higher than 20V.
4. Please charge the battery within the temperature range of 0~45°C.
Charging at too low temperature will shorten the cycle life of the batte-
ry.
5. For long term storage (more than 3 months), it should be stored in a
low humidity environment without corrosive gas at -10~50°C in a se-
mi-electric state.