9
Maximum / Minimum:
Displays maximum / minimum pressure values;
this is initiated upon powering the unit or since
the values were cleared.
1. When in Menu mode press
▴
,
▾
➟
to scroll to ‘Max’ (maximum display); this
is indicated in small font to the left of the
display’s unit of measure.
2. To clear both Min and Max values, press
and hold
zero
➠
3. Release of this key will leave you
in Menu mode. Use
▴
,
▾
➟
to
continue scrolling through the menu
options, OR hold,
menu
➠
to return
to Measurement mode.
Note: Clearing Minimum / Maximum values
will result in a blank display except for the
associated Min. / Max. icon and battery
indicator.
Note: The following actions will also clear
min/max values. Power o , zero gauge
function, tare function, field calibration
function, units programming, update rate, or
reset.
Timer:
Controls how long the gauge will remain
powered ON once the Power key
|
|
is
pressed.
1. When in Menu mode press
▴
,
▾
➟
to scroll until “TIMER” is displayed.
2. Press
|
|
➟
.
3. Then, press
▴
,
▾
➟
to scroll
through values. “NONE” designates
that the gauge will remain ON until
the power key
|
|
is pressed a second
time. Any other value (1 min [default]
/ 5 min / 20 min), other than “NONE”,
will designate the duration of time this
function will be in e ect.
4. Press
|
|
➟
to select desired value;
timer icon will be shown on the display
and the unit will display “DONE” then
return to Measurement mode.
Feature: Timer icon will fl ash 10 seconds
prior to gauge shut down. While the
gauge is powered on, any key press will
reset the timer.
To Next Page
Loading...
Need help?
General
