Enerpac Saf-T-Lite JHA Series User Manual

SAFETY INFORMATION
(continued)
WARNING
The load must be evenly distributed over the entire jacking pad of the toe
lift attachment. The plunger must be in exact line with the movement of the
load. When using multiple units to lift a load, all jacks must be operated at
the same time, so that the load is lifted evenly. Failure to lift the load
evenly could cause it to slip off the jacking pad.
WARNING
DO NOT lift a load which exceeds the
capacity of the jack. The load rating is
marked on the jack nameplate.
WARNING
If the jack is subjected to abnormal or shock loads, it should be inspected
immediately by a qualified hydraulic technician.
SPECIFICATIONS
Model
No.
Style Capacity
Tons
Stroke
in (cm)
Effective Area
in
2
(cm
2
)
Collapsed Height
in (cm)
JHA-73 Standard
Solid
Plunger
Aluminum
73.0 (7.62) 1.49 (9.61) 5.25 (13.33)
JHA-156 15 6.06 (15.39) 3.14 (20.26) 9.75 (24.77)
JHA-356 35 6.13 (15.57) 7.07 (45.62) 10.13 (25.73)
JHA756 75 6.06 (15.39) 15.90 (102.59) 11.25 (28.59)
JHA-1506 150 6.13 (15.57) 30.68 (197.95) 12.88 (32.72)
JTA-76 Toe Lift
Aluminum
76.06 (15.39) 3.14 (20.26) 12.56 (31.90)
JTA-176 17 6.13 (15.57) 7.07 (45.26) 14.19 (36.04)
JTA-356 35 6.06 (15.39) 15.90 (102.59) 16.63 (42.24)
3

Enerpac Saf-T-Lite JHA Series Specifications

General

Brand	Enerpac
Model	Saf-T-Lite JHA Series
Category	Jacks
Language	English