Enerpac W2000X - Page 34

34
7 Replacement parts and
recommended tools
7.1 Ordering Replacement Parts
For replacement parts information, refer
to the Enerpac repair parts sheet for your
wrench model. Repair parts sheets are
available on the internet at www.enerpac.
com.
Have the following information ready when
ordering replacement parts:
• Wrench model and serial numbers (for
both drive unit and cassette).
• Approximate date of purchase.
• Part number and description of each part
being ordered.
7.2 Recommended Tool Kit,
W2000X Series
– 7/8" A/F Spanner
– 3/4" A/F Spanner
– 5/8" A/F spanner
– Circlip Pliers
– Seal Extraction Tool
– 16 mm A/F Spanner
– ø 4 mm x 5 mm LG x 20 mm PCD
Pin Spanner
– 5 mm A/F Allen Key
– 3 mm A/F Allen Key
– 2.5 mm A/F Allen Key
– 3 mm Terminal Screwdriver
7.3 Recommended Tool Kit,
W4000X Series
– 7/8" A/F Spanner
– 3/4" A/F Spanner
– 5/8" A/F Spanner
– Circlip Pliers
– Seal Extraction Tool
– ø 4 mm x 5 mm LG x 25 mm
PCD Pin Spanner
– 6 mm A/F Allen Key
– 4 mm A/F Allen Key
– 2.5 mm A/F Allen Key
– 3 mm Terminal Screwdriver
7.4 Recommended Tool Kit,
W8000X Series
– 7/8" A/F Spanner
– 3/4" A/F Spanner
– 5/8" A/F Spanner
– Circlip Pliers
– Seal Extraction Tool
– 1 1/8" A/F Spanner
– ø 4 mm x 5 mm LG x 30 mm PCD
Pin Spanner
– 10 mm Allen Key
– 5 mm A/F Allen Key
– 4 mm A/F Allen Key
– 2.5 mm A/F Allen Key
– 3 mm Terminal Screwdriver
7.5 Recommended Tool Kit,
W15000X Series
– 7/8" A/F Spanner
– 3/4" A/F Spanner
– 5/8" A/F Spanner
– Circlip Pliers
– Seal Extraction Tool
– 1 3/8" A/F Spanner
– ø 4 mm x 5 mm LG x 40 mm PCD
Pin Spanner
– 10 mm A/F Allen Key
– 6 mm A/F Allen Key
– 4 mm A/F Allen Key
– 2.5 mm A/F Allen Key
– 3 mm Terminal Screwdriver
Notes:
A/F = Across Flats
PCD = Pitch Circle Diameter
ENGLISH