EnfaSafe 360 ONE FOR ALL

Need help?

Do you have a question about the EnfaSafe 360 ONE FOR ALL and is the answer not in the manual?

Summary

Notice and Regulations

ISOFIX System Notice (Rearward Facing)

Details ISOFIX system for rearward facing use, approved to Regulation No. 44,04.

Safety Warnings and Precautions

Child Restraint Use Instructions

Install Location Guidelines

Specifies correct installation locations for universal and semi-universal categories.

Harness Buckle Operation

Instructions on how to correctly use and secure the harness buckle.

Headrest Adjustment

Guide on adjusting headrest height for optimal child safety and fit.

Safety Belt Adjustment

Steps for tightening and loosening the vehicle's safety belt for secure fitting.

Seat Rotation Mechanism

Instructions on how to rotate the car seat for rearward or forward facing positions.

Seat Recline Adjustment

Guidance on adjusting the seat's recline positions for different age groups.

Harness and Pad Removal

Steps for removing the 5-point harness, triangle pad, and sleeping pad.

Support Leg Adjustment

Procedure for adjusting the support leg for secure installation.

Fabric Cover Removal

Instructions on how to remove and re-fit the fabric cover of the child seat.

Vehicle Installation Methods

Installation Using Vehicle Seat Belt

Step-by-step guide for installing the seat using the car's seat belt.

Installation Using ISOFIX Connectors

Instructions for securing the seat using ISOFIX attachment points.

This document is an instruction manual for the EnfaSafe 360 ONE FOR ALL child restraint system.

Function Description:

The EnfaSafe 360 ONE FOR ALL is a versatile child restraint system designed to accommodate children from birth up to 12 years of age, covering weight groups 0+, I, II, and III (0-36 kg). It is a 360-degree rotatable car seat, allowing for both rearward and forward-facing installation, depending on the child's age and weight. The seat is approved to Regulation No. 44, 04 series of amendments, making it suitable for general use in vehicles. It can be installed using either the vehicle's 3-point safety belt or ISOFIX anchorage systems, offering flexibility for different car models. The seat features a 5-point harness system for younger children, which can be removed and stored for older children who use the vehicle's 3-point belt. Key adjustable components include the headrest, recline positions, and a support leg for enhanced stability.

Important Technical Specifications:

Group: 0+ I II III
Weight: 0-36 kg
Age: 0-12 years
Dimensions:
- Length: 510mm
- Width: 436mm
- Height: 640-840mm
Approval: Approved to Regulation No. 44, 04 series of amendments.
ISOFIX Size Class (Rearward Facing Group 0 I): E for Group 0 (0-10kg) and D for Group I (9-18kg).
ISOFIX Size Class (Forward Facing Group I): E for Group 0 (0-10kg) and D for Group I (9-18kg).
Installation Methods:
- Vehicle's 3-point safety belt (Universal category for Group II III, Semi-Universal category for Group 0+ I II III).
- ISOFIX connector and support leg (Semi-Universal category for Group 0+ I II III).

Usage Features:

Installation:

Universal Category (Group II III): Requires a 3-point retractor belt complying with ECE R16. Not suitable for 2-point seat belts.
Semi-Universal Category (Group 0+ I II III): Requires 3-point safety belts and ISOFIX attachments complying with UN/ECE Regulation No. 16 or equivalent standards.
Rearward Facing (Group 0+ / 0-13kg): Must be installed in the rearward-facing position with the vehicle's 3-point belt or ISOFIX connector and support leg. The child seat should be at a maximum angle of inclination (lying level). Never use in seating positions with an active frontal airbag.
Forward Facing (Group I / 9-18kg): Can be installed with the vehicle's 3-point belt or ISOFIX connector and support leg.
Forward Facing (Group II III / 15-36kg): Requires removal of the 5-point harness, sleeping pads, and triangle pads. Installed with the vehicle's 3-point belt or ISOFIX connector and belt.
ISOFIX Installation: Insert guides into ISOFIX attachment points. Press the ISOFIX button to extend locking arms until an audible CLICK is heard and the button turns green, indicating full engagement.
Support Leg Adjustment: Pull out the support leg to maximum angle. Press the adjust button to extend the leg until it is in full contact with the vehicle floor. The display window turns green when correctly installed. For Group II III, the support leg should be adjusted to the shortest position and allowed to hang, showing a red indicator.

Harness System:

5-Point Harness: Used for Group 0+ and I. Engage buckle tongues until an audible CLICK is heard. Pull shoulder straps to remove slack. Open by pressing the red button.
Harness Removal: For Group II III, the 5-point harness can be removed and stored in a compartment at the rear of the car seat. This involves removing shoulder pads, loosening the harness, detaching it from the metal link area and harness axle, and storing the buckle components.

Adjustments:

Headrest Adjustment:
- Group 0 0+1 (levels 1-6): Loosen shoulder straps, pull the headrest height adjuster, and select the appropriate height for the child's shoulders.
- Group I II III (levels 7-10): Move the headrest to the highest position for cover removal. Ensure shoulder straps are at or just above the child's shoulders.
Recline Adjustment: Push the recline handle up and pull the seat outward.
- Forward Facing: 4 positions (levels 1-4).
- Rearward Facing: 1 position (level 5), only for Group 0 0+1 (0-18kg).
- Group I (9-18kg): Levels 1-4.
- Group II III (15-36kg): Level 1.
Rotation: Pull the rotation adjuster out with your thumb, then rotate the seat 360 degrees. Ensure the adjuster rebounds and the seat is fixed well. Rearward direction for Group 0 0+1 (0-18kg), forward direction for Group I II III (9-36kg).
Safety Belt Adjustment: Pull the lap belt section low down to firmly engage the pelvis. Adjust the diagonal belt to run diagonally backward, positioned between the outside of the neck and shoulder.

Pads:

Triangle Pad: Remove when child's weight exceeds 8kg.
Sleeping Pad: Remove when child's weight exceeds 12kg.

Safety Warnings:

Read all instructions carefully before use. Failure to do so may result in serious injury or death.
Never use in seating positions with an active frontal airbag when rearward-facing.
Do not use a child safety seat that has been in a crash.
Do not use a second-hand child seat or one with unknown history.
Do not use with damaged or missing parts, or frayed harness straps/vehicle belt.
Ensure all straps are tight and not twisted.
Do not make alterations or additions without approval.
Keep the chair away from direct sunlight to prevent overheating.
Never leave a child unattended in the restraint system.
Secure all luggage or other objects in the vehicle.
The child restraint must not be used without its cover. Replace cover only with manufacturer-recommended ones.
Keep the restraint rear-facing until the child's mass is greater than 9kg.
Consult a professional doctor or hospital staff member for suitability assessment for low birth weight and premature infants.

Maintenance Features:

Cleaning:

Fabric Covers and Trims: Removable. Clean with warm water and household soap or mild detergent. Allow to dry fully, preferably away from direct sunlight.
Harness and Shell: Sponge clean using warm water and mild soap. Do not use other cleaning agents.
Buckle: Wash in warm water to remove food, drink, or debris. Ensure an audible CLICK is heard after cleaning to confirm proper functioning.
Care Symbols:
- Hand wash only, temperature 30°C.
- Do not bleach.
- Do not tumble dry.
- Do not iron.
- Do not dry clean.
- Dry flat in the shade.