Need help?Do you have a question about the Engl Z-11 and is the answer not in the manual?
Explains the WRITE button's function, saving settings, and status LED behavior for program locations.
Details setting MIDI channels via code switches for OMNI or POLY modes and their respective reception settings.
Explains how buttons 3-8 control the status (open/closed) of Switch Loops 1 through 6 and their associated LEDs.
Explains the MIDI THRU and MIDI IN 5-pin DIN jacks, their functions, and MIDI IN's role in powering the Z-12.
Details the function of the POWER SUPPLY SELECTOR SWITCH for the ENGL MIDI Footcontroller Z-12 compatibility.
Describes the 1/4" stereo and mono jacks for connecting external devices to Switch Loops 1 through 6.
Specifies the connection for the external power pack and voltage requirements for the MIDI Switcher.
Provides options for placing the device, attaching it to other ENGL gear, or mounting in a 19" rack system.
Recommends connecting devices when off and details using 1/4" cables, MIDI cables, and avoiding cable stress.
Advises checking loop allocation, labeling functions, and using colored cables for easier setup and troubleshooting.
Outlines the steps for selecting MIDI program locations, setting desired switch loop states, and saving them.
Lists power supply requirements, system controller details, dimensions, and weight of the MIDI Switcher.
Diagram showing pin assignments for the MIDI INPUT port, including power supply and MIDI data lines.
Illustrates the internal wiring schematics for the stereo and mono switching loop jacks on the device.
To Next Page
General