Why can't I turn on my ENGWE-BIKES Bicycle?
If your ENGWE-BIKES Bicycle won't turn on, the issue is likely one of the following: * **Battery is out of power:** Fully charge the battery. * **Battery damaged:** Replace the battery.
What to do if my ENGWE-BIKES Bicycle's mileage is inadequate after a full charge?
If your ENGWE-BIKES Bicycle isn't going as far as it should after a full charge, here are some potential reasons and fixes: * **Inadequate tire pressure:** Inflate the tires to the correct pressure. * **Charger failure:** Get the charger repaired. * **Battery not fully charging:** Examine and repair the controller. * **Controller failure:** Replace the controller. * **Battery aging or damage:** Replace the battery. * **Assembly issues:** Re-adjust the e-Bike. * **Too much uphill riding:** Assist the e-Bike by pedaling. * **Low temperature:** Warm the battery above 0°C (32°F).
How to fix speed adjustment issues on my ENGWE-BIKES Bicycle?
If you're having trouble adjusting the speed on your ENGWE-BIKES Bicycle, consider these potential causes and solutions: * **Low battery voltage:** Fully charge the battery. * **Damaged throttle governing bar:** Replace the throttle governing bar. * **Spring failure or being locked:** Replace the spring.
What to do if the wheel hub stops running on my ENGWE-BIKES Bicycle after switching it on?
If the wheel hub on your ENGWE-BIKES Bicycle stops running after you turn it on, check the following: * **Loose battery connection:** Re-connect the battery. * **Poor contact of controlling line:** Replace the connection line. * **Broken battery protective board:** Replace the battery’s protective board with a new one.
General| Category | Electric Bicycle |
|---|---|
| Battery | 48V 13Ah Lithium-Ion Battery |
| Frame Material | Aluminum Alloy |
| Suspension | Full Suspension |
| Display | LCD Display |
| Max Speed | 25 mph (40 km/h) |
| Range | 31-62 miles (50-100 km) |
| Load Capacity | 330 lbs (150 kg) |
| Weight | 77 lbs (35 kg) |
| Motor | 750W Brushless Motor |
| Gears | Shimano 8-Speed |
Detailed instructions for charging the e-bike battery and understanding charge indicators.
Explains how the pedal-assist mode works, including activation, stopping, and speed limits.
Details how to use the hand throttle to control power assist and accelerate the e-bike.
Crucial safety warnings for handling and charging the e-bike battery to prevent hazards.
Essential safety precautions for using the battery charger to avoid risks like overheating or shocks.
Covers safety practices for charging, including plug handling, water avoidance, and using correct equipment.
To Next Page
