Need help?Do you have a question about the ennoLogic eT650D and is the answer not in the manual?
Identifies and labels the primary physical components of the IR thermometer.
Explains the various symbols and readings shown on the thermometer's LCD screen.
Details how to access and replace the 9V battery powering the unit.
Step-by-step guide on aiming, triggering, and reading temperature measurements.
Instructions on switching between Celsius and Fahrenheit temperature scales.
Enables continuous measurement without holding the trigger button.
Guides on turning the dual lasers and display backlight on/off.
Explains the 10:1 ratio and how target distance affects measurement spot size.
Details on tracking maximum, minimum, average, and difference temperatures.
Configuration of audible alarms for temperature thresholds.
Explains emissivity and its importance for accurate IR temperature readings.
Provides a reference table of emissivity values for common materials.
How to store up to 20 readings and recall them later.
Details on temperature range, resolution, optical resolution, and accuracy.
Information on laser power, wavelength, and battery lifetime.
Overview of the thermometer's advanced capabilities.
Details on operating and storage temperature and humidity ranges.
Information on the device's physical size, weight, and power requirements.
General| Type | Infrared Thermometer |
|---|---|
| Distance to Spot Ratio | 12:1 |
| Response Time | 500 ms |
| Auto Power Off | Yes |
| Temperature Range | -50°C ~ 650°C |
| Accuracy | ±1.5 °C or ±1.5% |
| Resolution | 0.1 °C |
| Display | LCD |
| Power Supply | 9V Battery |
| Emissivity | Adjustable 0.1~1.0 |
| Spectral Response | 8 to 14 µm |
| Battery | 9V |
To Next Page