Do you have a question about the Eno Open Sea 1413 and is the answer not in the manual?
Appliance must be installed, maintained, and serviced only by authorized persons. Do not modify the appliance.
Install appliance according to manufacturer's instructions, local regulations, and ensure adequate ventilation.
Details on gas inlet location, flexible hose assembly, AGA approved fittings, and pressure test point.
Procedure for checking gas installation tightness using air pressure and soapy water, avoiding naked flames.
Details on engaging and disengaging the anti-rolling stabiliser for cooker stability on a list.
Recommendations for pre-heating the oven for better cooking efficiency and proper use of oven components.
Step-by-step guide on how to safely detach the cooker from its mounting brackets.
Instructions for lighting, operating, and extinguishing top burners using control knobs and ignition.
Procedure for lighting the oven burner, engaging the flame failure device, and its safety function.
Steps for lighting the grill burner, including pre-heating and proper rack positioning for grilling.
Guide on how to replace the 1.5V battery for the electronic ignition device.
Table detailing burner types, nominal output, jet size, and gas input for propane at 2.75kPa.
Instructions on how to adjust the air ring for the oven burner for optimal combustion.
Identifies signs of abnormal operation, such as yellow flame tipping or burners failing to ignite.
Guidelines for cleaning the cooker, including grids, burner caps, and oven glass, avoiding abrasive cleaners.
Loading...