Section 30 00-02-0842
2013-12-17 - 1 -
ML25 Panel
The MurphyLink® Series ML25 Panel features the PowerView™ Model PV25 display. This
J1939-compliant device provides electronic engine parameter data, is simple to install, and
matches the PowerView line of rugged displays. The PV25 can be powered by 12 or 24 volt
systems.
The PV25 is equipped with two push buttons to quickly access a convenient menu. In addition,
a back-lit graphic display and two LED’s indicate Active-fault Alarm or Shutdown status.
Active and Stored Fault messages display the SPN (Suspect Parameter Number), FMI (Failure
Mode Indicator) and the OC (Occurrence Count) using the SAE J1939 protocol.
Please refer to the documents included within the panel shipment for the correct panel layout
and schematic.
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
To Next Page
Loading...
Need help?
General