-4-
(4) The cables between leakage protection air breaker and 16A socket are required to use copper
core cables with flame-retardant sheath, the cables’ core diameter is not less than 2.5mm
2
.
(5) Prevent plugs, sockets from dripping or splashing.
Note: According to statistics, 80% fire accident caused by an electric car occurred during
charging, main reasons for this are insufficient core diameter size of cables, poor quality plugs
and sockets, poor contact of plugs and sockets, poor flame-retardant sheath or shells of breakers,
plugs and sockets and so on.
2. Correct Use of Input Connections
(1) It’s required to use a dedicated 16A power plug for the charger;
(2) It’s required to use copper core cables with flame-retardant sheath; the cables’ core diameter is
not less than 2.5mm
2
.
(3) Make sure that the plug is clean (no dirty) and no damage before charging.
3.Charging Environment Requirements
(1) Spacious and airy;
(2) No flammable materials; prohibited charging in warehouse.
(3) Keep away from valuables such as automobiles.
(4) Keep away from bedroom when charging at night.
(5)Prohibit placing the charging plugs, charging cables or charger itself on car cabs, plastics
To Next Page