Enseo HD2000 - TV Configuration for Enseo Integration; Panasonic TV Configuration; LG TV Configuration; Philips and Sharp TV Configuration

TA-8830+TA8300 Installation Manual
Last Revised: 3/26/12
17
Panasonic North America Series 20/12 + Enseo HD2000/3000
Configure TV: Go into HOTEL MODE (<MENU>, <G>, <Y>, <0>), set
MODE=ON, TA Control=EXTERNAL, BUTTON LOCK is OFF.
LG North America + Enseo HD2000/3000
Configure TV: Plug in DATA jack to TV’s DATA port. TV will automatically
power off and enter Enseo Mode after 3 minutes of inactivity.
Philips North America, Sharp North America +
Enseo HD2000/3000
No TV configuration needed.
Any Samsung North America Model + Enseo HD2000/3000
Connect STB RJ11 to TV’s DATA port using Samsung’s BN3900865B
RJ11 cable.
Configure TV: Turn power ON. With Samsung remote control,
enter the menu by pressing <INFO>, <MENU>, <0>, <1>,
<EXIT>. Ensure the following is selected:
Hotel Mode is ON (or Interactive)
Music Mode (AV) is ON
Music Mode (PC) is ON
RJP Priority AV, PC and HDMI is 1, 2, and 3, respectively
RJP AV Option is AV1
RJP HDMI Option is HDMI2
Set SI Vendor to ENSEO