MR/ZR GETTING STARTED GUIDE 
created a great sequences that you want to move into your external sequencer. You have 
two options. One is to save the sequence as a standard MIDI file (see Disk Functions) or 
you can play the MR/ZR sequence in real-time into the external sequencer.  
 
External sequencer: 
Set it up to follow external MIDI Clock 
If it has the ability to record several tracks (and MIDI channels) at once, do that setup. 
 
MR/ZR: 
Press the System/MIDI button 
Turn the Parameter knob to select Edit MIDI Settings 
Press Enter 
Turn the Parameter knob to select Xmit MIDI Clocks = 
Select ON with the Value knob 
*Press the Select Sound button 
Turn the Parameter knob to select the MIDI Out instrument 
Change the MIDI Channel to 1 
Press the Send to Track button 
Press Track 1 
Press Enter 
(Repeat the above steps* and assign the MIDI Out instrument to all other tracks 
INCLUDING the Rhythm track. Be sure to adjust the MIDI channel to match the track you 
are going to send the MIDI OUT instrument to, i.e. Channel 2-Track 2, Channel 3-Track3 
etc.)  
 
Go into Record mode on your external sequencer  
Press Play on the MR/ZR 
(You WILL NOT HEAR any sound as the transfer is happening. The MR/ZR does not 
have the ability to have a dual MIDI status per track.) 
When the song is completed, change the external sequencer's MIDI clock back to Internal 
and in the external sequencer, assign the necessary bank and program changes to each 
track to select the desired sounds. 
 
MR/ZR control over a MIDI tone module or keyboard   
 
MIDI connections with an external keyboard or tone module: 
MIDI Out of the MR/ZR to MIDI In of the external module 
Audio Out of the MR/ZR and the tone module to the Audio inputs of a mixer  
Audio Out of the mixer to a pair of headphones or powered monitors 
 
External keyboard or module: 
Refer to that product's user manual to set it to Multimode 
 
MR/ZR: 
Press the Select Sound button 
Turn the Parameter knob to select the MIDI Out instrument 
Change the MIDI Channel to match the track you are sending it to 
Press the Send to Track button 
Press the desired Track button  
Press Enter 
 
Any track that has the MIDI Out instrument assigned to it will control any external MIDI 
module or keyboard connected.