Need help?Do you have a question about the Enster NST-IPH6092NPSD and is the answer not in the manual?
Connect power, adjust focus/iris for clear image, and set surveillance area.
Configure traffic modes, speed, HSBLC, WDR, brightness, noise reduction, and language.
Configure NVR access using ONVIF protocol and port 8080.
Access camera via browser using IP, username, and password.
Download and install the ActiveX plugin for full browser functionality.
Format SD card to FAT32 and browse its contents for stored data.
Adjust video, image, and audio settings for optimal performance.
Configure IP address, subnet mask, gateway, and HTTP/RTSP ports.
Enable ONVIF for NVR compatibility and P2P for mobile access.
Configure alarm inputs, motion detection zones, and sensitivity.
Manage user accounts and configure automatic snapshot settings.
Set up email notifications and FTP server for saving captured images.
Synchronize system time via NTP or PC, and access SD card content.
Review default IP, username, password, and network ports.
To Next Page
General