Entec Wearable Air Purifier Mask - User Manual

DAEHYUNENTEC
Wearable Air Purifier Mask
User Manual
Korean
English

Summary

Product Usage and Features

Intended Use

Instructions for using the mask in specific environments like outdoors with bad air quality or dusty workplaces.

Product Explanation

The product purifies air using a filter and supplies fresh air to the user's face, removing contaminants.

Key Product Features

Features include filter, air control, positive pressure, comfort, and lightweight design for pleasant use.

Safety Cautions and Warnings

Safety Warnings

Safety warnings regarding filter use, oxygen levels, device modification, environment, and charging to prevent hazards.

Operational Checklist

Regular checks for filter, connections, mask integrity, and air supply to ensure safe and proper operation.

Operating the Wearable Air Purifier Mask

Filter Installation Guide

Step-by-step guide for replacing the filter, including safety precautions and confirmation of proper installation.

Controller Operation

Instructions for powering the controller and adjusting airflow settings (weak, middle, strong) for optimal performance.

How to Wear the Mask

Guidance on fitting the mask using different strap types, ensuring a secure seal and comfortable wear.

Using and Charging the Device

Details on charging indicators, battery life, initial charging, and the charging process for continuous use.

Product Storage and Maintenance

Storage Guidelines

Guidelines for storing the product in optimal conditions to maintain its quality and functionality.

Maintenance Procedures

Procedures for product checks, filter replacement, and cleaning components for hygiene and optimal performance.

Troubleshooting Common Issues

A guide to diagnose and resolve common operational issues, with instructions on when to seek further assistance.

Whats Included: Product Configuration

Product Components List

A comprehensive list of all components included in the product package, aiding in setup and verification.

Technical Product Specifications

Detailed Specifications

Detailed technical specifications including dimensions, performance metrics, operating conditions, and materials used.

Wearable Air Purifier Mask Warranty

Warranty Information and Service

Information on warranty coverage, terms for repairs, and the process for service requests and claims.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Filter Installation
5. Controller Usage
6. Wearing the Mask
7. Charging
8. Maintenance Features
9. Storage
10. General Maintenance
11. Troubleshooting Guide

This document serves as the User Manual for the DAEHYUN Wearable Air Purifier Mask, model DH-WAPM1. It provides comprehensive information on the product's usage, features, cautions, storage, maintenance, configurations, specifications, and warranty.

Function Description:

The Wearable Air Purifier Mask is designed to purify fine dust and other contaminants from the air, supplying fresh air directly to the user's face. It achieves this by utilizing a filter and an air flow control system. A key feature is its ability to generate positive pressure within the mask, preventing harmful external substances from entering. This design aims to protect the user from airborne pollutants and offers a more comfortable breathing experience compared to traditional yellowdust masks, by eliminating discomfort caused by moisture from breathing. The mask is also ultra-light, designed to reduce weight and throat fatigue during use.

Important Technical Specifications:

• Model Name: DH-WAPM1
• Mask Size: 120mm x 110mm x 120mm
• Controller Size: 10mm x 3mm x 3mm
• Air Flow Rate:
  • Weak: 100 L/min
  • Middle: 120 L/min
  • Strong: 140 L/min
• Operational Time (depending on flow rate):
  • Weak: 5 hours
  • Middle: 4 hours
  • Strong: 3 hours
• Operational Temperature: -5°C ~ +55°C
• Storage Temperature: -5°C ~ 55°C (with relative humidity below 90%)
• Weight:
  • Mask: 178g
  • Controller: 95g
  • Filter: 10g
• Charger: Micro USB 5pin 220V
• Cable Type: C type cable
• Battery: Li-ion 12V 2600mA
• Filter Type: HEPA filter (H12)
• Warranty Period: 12 months for free repair, 10 years for paid repair.

Usage Features:

The mask is recommended for outdoor use when air quality is poor and in dusty workplaces.

Filter Installation:

1. Ensure the power is turned off.
2. Lift the cover under the mask.
3. Insert the filter.
4. Close the cover, ensuring it clicks into place.

Controller Usage:

• Turning On: Press the power button on the controller for 3 seconds.
• Flow Rate Control:
  • Upon turning on, the flow starts at 'weak'.
  • Each subsequent press of the power button increases the flow by one step: 'weak' -> 'middle' -> 'strong'.
  • Pressing the button again after 'strong' returns the flow to 'weak'.
• Turning Off: Press the power button on the controller for 3 seconds.

Wearing the Mask:

The mask comes with two head strap types: Buckle-type and Velcro-type.

• Buckle-type:
  1. Unhook the head strap.
  2. Place the mask in front of your face.
  3. Fasten the buckle of the head strap behind your head.
  4. Adjust the length of the hair strap to fit your face.
  5. Ensure the mask is in close contact with your face and adjust the head strap as needed.
• Velcro-type:
  1. Remove the Velcro on the head strap.
  2. Place the mask in front of your face.
  3. Stick the Velcro behind your head to fit the face.
  4. Adjust the length of the hair strap to fit your face.
  5. Ensure the mask is in close contact with your face, hang it on your ears to prevent dripping, and adjust the head strap.
• Important Note: Always wear the mask so that the smooth side of the head strap touches your face. Incorrect attachment of the head strap (e.g., left/right reversed) may prevent proper mask fit.

Charging:

• The charging controller displays a red light during charging and a blue light when in use. The light turns off when fully charged.
• When the controller is off, pressing the button briefly shows the remaining battery: green for sufficient charge, red for low battery.
• A fully charged controller provides 3 to 5 hours of use, depending on the mask's flow rate.
• For first-time use or after more than 5 days of non-use, recharge the controller before reuse.
• Charge the controller after removing it from the mask.
• Full charging takes approximately 3 hours, though this can vary based on the remaining battery level.
• The charger voltage should be 220V.

Maintenance Features:

Storage:

• Store the product in a dry, clean place when not in use for extended periods.
• Keep away from direct sunlight, heat, oil, organic vapor, and moisture.
• For storage below 0°C, pre-operation is required to ensure battery capacity.
• The ideal storage temperature is between -5°C and +55°C, with relative humidity below 90%.
• Keep the mask, controller, and charger away from moisture.

General Maintenance:

• Always check the product before use.
• Regularly check the filter. Replace it with a new one if damaged or contaminated.
• If air supply is insufficient, check and replace the filter.
• Important: Used filters cannot be cleaned or reused. The product warranty does not cover issues arising from cleaning used filters or removing contaminants with compressed air.
• To clean the face part of the mask, gently wipe it with household detergent and water using a clean patch.
• The silicone face part is detachable for cleaning and drying.
• Do not use petroleum, organic solvents, or abrasive cleaners.
• Caution: Be careful not to let water get into the main body of the device during cleaning.

Troubleshooting Guide:

The manual provides a troubleshooting table for common issues:

| Problems | Cause | Solution

Entec Wearable Air Purifier Mask Specifications