Entek IRD 6600 Series User Manual

6622
Dual Channel Absolute
Vibration Monitor
Your Guide to the
6622 Protection Monitor
Entek IRD International Corporation
P/N 44465
H
L
P
L
I
T
D
I
S
R
E
S
T
S
T
S
E
L
DUAL CHANNEL
VIBRATION MONITOR
6622
CHAN 1 CHAN 2
TACHO
D
D
A A
4.70
mil pp

Entek IRD 6600 Series Specifications

General

Brand	Entek IRD
Model	6600 Series
Category	Protection Device
Language	English

Summary

6622 Dual Channel Absolute Vibration Monitor

Front Panel Interface and Connections

Front Panel Layout and Controls

Describes the physical layout, displays, and controls of the 6622 monitor's front panel.

Signal Inputs and Outputs

Basic Operation and Status Monitoring

Understanding Status Messages

Explains various status, fault, and error messages displayed by the 6622 monitor.

Installation and Wiring Guide

Transducer Wiring Procedures

Provides wiring diagrams and notes for ICP, non-ICP, velocity, and non-contact sensors.

Configuration Menu System

User Menu Configuration Details

Guides on setting date/time, alarm setpoints, and inhibiting relays via the User menu.

Factory Menu Configuration

Factory Menu Structure and Options

Details the Factory menu structure and options for advanced settings.

Configuring Input Signal Parameters

Range Settings for Channels

Maximum Input Signal Settings

Transducer Fault Detection and Relay Settings

TX OK Submenu Configuration

RELAYS Submenu Configuration

Testing and Calibration Procedures

Calibration and System OK Relay Tests

Step-by-step procedure to test calibration and the System OK relay function.

Alarm Relay Testing Steps

Procedure to test the monitor's Alert and Danger alarm relays.

Technical Specifications Summary

Input and Signal Conditioning Specs

Output and Data Transfer Specs