Need help?Do you have a question about the Entes EMM Series and is the answer not in the manual?
General| Brand | Entes |
|---|---|
| Model | EMM Series |
| Category | Multimeter |
| Language | English |
Safety guidelines and warnings for device installation and operation.
Instructions for securing the device and proper power disconnection.
Provides detailed technical parameters and performance specifications.
Describes the primary functions and operational features of the device.
Displays phase-neutral and phase-phase voltage measurements.
Shows instant current values for each phase and min/max readings.
Enables or disables password protection for device settings.
Procedure for setting and confirming a new password for security.
Configures communication parameters like Modbus address and bit rate.
Sets the unique Modbus address for device communication.
Selects the user mode (simple or advanced) for alarm configuration.
Allows programming of custom alarms based on various parameters.
Describes the alarm when no voltage is measured on a phase.
Describes the alarm when no current is measured on a phase.
Indicates an alarm when phases are not connected in the correct order.
To Next Page