EasyManua.ls Logo

Entrematic Industrial HVLS Fan - User Manual

Entrematic Industrial HVLS Fan
52 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User’s Manual
Installation, Operations,
Maintenance and Parts
Part No. 6021140A
Do not install, operate or service this product unless you
have read and understand the Safety Practices, Warnings,
and Installation and Operating Instructions contained in
this User’s Manual. Failure to do so could result in death
or serious injury.
This manual applies to fans
manufactured beginning October
2017.
Industrial HVLS Fan
User’s Manual

Table of Contents

Questions and Answers

  • J
    James RichardsJul 30, 2025
    What to do if my Entrematic Industrial HVLS Fan does not operate but the control panel has power?
    • A
      amymilesJul 30, 2025
      If your Entrematic Fan isn't working despite the control panel having power, consider these potential causes: * Check for any obstructions preventing the fan's movement. * Ensure the remote is properly connected to the VFD. * Inspect the VFD for any faults and reset the drive by cycling the power (OFF/ON). * Verify the fire circuit isn't open; a red fire alarm indicator signals an active fire alarm or an open circuit. Review and reset the building's fire system if needed.

Summary

Introduction and Safety

Safety Signal Words

Explanation of safety signal words like DANGER, WARNING, CAUTION, and NOTICE used in the manual.

Safety Practices

Installation and Operation Safety

Maintenance and Service Safety

Installation Considerations

Exclusion Zone Warnings

Warnings about maintaining exclusion zones to prevent fan failure and injury.

Installation Procedures

Pre-Installation Power Safety

Mandatory safety procedure to disconnect and lock out power before installation.

Fan Mount Assembly and Installation

Powerhead and Safety Cable Installation

Guy Wire Installation and Safety

Detailed instructions for installing guy wires and associated safety warnings.

Fan Blade and Gearbox Installation

Motor Cover and Electrical Safety

Instructions for installing the motor cover and crucial electrical safety measures.

VFD Box and Remote Control Installation

Operating Instructions

Fan Control Screen Overview

Pre-Operation Checks and Safety

Essential checks and safety warnings before starting the fan.

Fan Operation and Control

Understanding Fault Codes

How to display and interpret fault codes from the fan's VFD.

Fault Code Definitions

A comprehensive list of fault codes and their corresponding error descriptions.

Planned Maintenance Procedures

Pre-Maintenance Power Safety

Mandatory safety procedure to disconnect and lock out power before any maintenance.

Troubleshooting Guide

Pre-Troubleshooting Safety

Warning to read safety and operation sections before troubleshooting the fan.

Fan Operation Troubleshooting

VFD Fault Codes

VFD Fault Codes Overview

Explanation of fault codes displayed on the VFD.

VFD Fault Code Details

Detailed list of VFD fault codes, indications, and names.

Optional Fire Control System Shutdown

Fire Control Panel Installation

Electrical Work Safety for Fire Systems

Safety warnings for electrical work related to fire control system installation.

Electrical Schematics

Electrical Installation Safety Precautions

Safety warnings and requirements for all electrical work on the fan system.

VFD Input;Output Schematics

Optional Wiring Details

550-600 V Supply Wiring Details

High Voltage Electrical Safety

Safety warnings for working with high voltage electrical connections.

Product Warranty Information

Entrematic Industrial HVLS Fan Specifications

General IconGeneral
BrandEntrematic
ModelIndustrial HVLS Fan
CategoryFan
LanguageEnglish