Entrya D22S - Code Management; Creating and Changing Codes

4
Code
#
#
#
#16 ... 35
Nr
All texts and images in this manual are protected by copyright and intellectual property
of ENTRYA TECHNOLOGIES BVBA.
V.101120210942
Code for Lock 1
Use parameters 16 up to 35 for conguring up to 20 codes for Lock 1.
4 - 12 numbers
Enter the Mastercode (default: 1234) and conrm with #.
When the code is correct, two beeps will be played.
Choose the desired parameter and conrm with #.
The door stations sounds two beeps to conrm.
Enter the desired code and conrm with #.
The door station conrms the input with one beep.
Parameter Code
16 1
17 2
18 3
... ...
34 19
35 20
Important!
The menu will close automatically after 10 seconds of inactivity.
Usage of the keypad
Usage in a Villa system
Usage in an appartment system
Press the code and conrm with # to activate the lock. Push * to cancel.
Push the call button to start a call.
Press the desired call number and conrm with the call button.
Create or change codes
Create up to 40 codes to activate the desired lock outputs.
Mastercode