Envi HH1012T - Features and Benefits; Important Instructions

Page 2
economical. safe. simple.
IMPORTANT INSTRUCTIONS
SAVE THESE INSTRUCTIONS
• Eliminates hot and cold spots where central heat is
ineffective.
• Ultra Safe - cool to the touch (90
o
F/32
o
C) can leave on
unattended 24/7.
• Healthy - won’t blow dust and allergens around or dry
out the air.
• Totally silent fanless teachnology.
• Auto-dimming of power light for dark bedrooms.
• Easy Installation – no drill required for mounting to wall.
• Slim - space saving design, only 2in (5cm) thin.
• Long life - No moving parts, crack resistance surface
• Now available in hardwired & USA 220volt models.
FEATURES & BENEFITS
• American Owned & Built with 3 year Warranty (USA )
• ISO 9001 Quality Certification.
• Patented, efficient “Stack Convection” Technology
• Adjustable Temperature control with simple operation.
• Wall-Sens
TM
Technology, safety cut off feature.
• NEW!Internal Safety Locking Feature, locks heater to
wall using provided allen key tool.
• Convenient cordset storage inside the heater.
• Turn down the central heat thermostat and use envi
heaters where needed.
• Environmentally friendly - low power consumption.
THANK YOU FOR CHOOSING THE ENVI HEATER
Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects, instal-
lation and care of your new Envi Heater. For your own records, please attach a copy of your sales receipt to this manual. Also,
write the store name/location, date, and serial number in the warranty section on the back of this manual (page 8).
MISSING PARTS? HAVE QUESTIONS OR NEED HELP?
(PLEASE DO NOT RETURN TO RETAIL STORE BEFORE YOU CALL THE ENVI HELP DESK)
We are here to help you with any questions you might have. Before you call for help though, please read this manual as it
contains instructions to help you to install, operate and maintain your heater properly. If you receive a damaged heater - please
immediately contact the dealer that sold you your Envi heater. If you still need help please call the Envi Help desk in the
USA/Canada Toll Free @ (800) 807-0107 or if calling from outside the USA call +1 (281) 516-1577.
HEATER WILL NOT OPERATE UNLESS MOUNTED
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Read all instructions before installing or using this heater.
2. Extreme caution is necessary when any heater is used by or
near children or invalids, or when the heater is left operat-
ing and unattended.
3. Do not operate any heater after it malfunctions. Discon-
nect power at service panel and have heater inspected by
a reputable electrician before reusing.
4. For plug-in heaters, to disconnect, push power button to
turn heater OFF (the power indicator light will turn off),
then remove plug from outlet. Pull firmly on the plug, do
not unplug by pulling on the cord.
5. Connect to properly grounded outlets only.
6. For hardwired heaters, to disconnect, turn controls to off,
and turn off power to heater circuit at main disconnect
panel (or operate internal disconnect switch if provided).
7. Do not insert or allow foreign objects to enter any ventila-
tion or exhaust opening as this may cause an electric shock
or fire, or damage the heater.
8. To prevent a possible fire, do not block air intakes or ex-
haust in any manner.
9. A heater has hot or arcing parts inside. Do not use in areas
where gasoline, paint, explosive and/or flammable liquids
are used or stored. Keep unit away from heated surfaces
and open flames.
10. Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons
11. Use only for the intended household or office uses as de-
scribed in this manual. Any other use not recommended by
the manufacturer may cause fire, electric shock, or injury to
persons. The use of non-recommended attachments sold
by unauthorized dealers may cause hazards.
12. Do not use outdoors.
13. This heater is intended for use as a WALL MOUNTED heater
only. Failure to properly secure the heater to a flat, level
and vertical wall may result in heater malfunction and/or
property damage.
14. This heater will not operate (power is disconnected) unless
it is attached to a wall using the supplied wall mounting
clips which engage the internal “wall-sens” safety switch.
15. DO NOT attempt to repair or replace any electrical or
mechanical functions on this unit. Doing so will void your
warranty. The inside of the unit contains no user service-
able parts. Qualified personnel should perform all servicing
only.