Enviolo City User Manual

enviolo Assembly Instructions 1
MAY 2021
VERSION 1
Assembly Instructions
CY 2021

Enviolo City Specifications

General

Brand	Enviolo
Model	City
Category	Bicycle Accessories
Language	English

Summary

Compatibility Matrix

For Your Safety

Safety Notices and Tools

Safety Notices

Explains safety symbols (Attention, Caution, Danger, Warning) and their meanings.

AUTOMATIQ Wire Harness

Step by Step Assembly Instructions

Wheel Building

Lacing and Spoke Recommendations

Guidance on spoke diameter, lacing patterns, and wheel sizes.

Assembly of the Sprocket

Assembly of the Manual Hub Interface

Manual Hub Interface Installation

Assembly of the Manual Controller

Handlebar Mounting

Safety Precautions

Warnings regarding proper function, unobstructed operation, and grip security.

Assembly of the Shift Cable Housing

Cable Routing and Securing

Assembly of the Shift Cables

Cable Installation and Slack Adjustment

Set the Shift Cable Length

Assembly of the Rear Wheel

135 mm Variants Installation

Rear Wheel Installation (148mm Variants)

Adjustment of Cable Slack

Assembly of the Sprocket Magnet Ring

Assembly of the Hub Magnet Ring

Assembly of the AUTOMATIQ Hub Interface

Compatibility & Orientation

AUTOMATIQ Hub Interface Installation

135mm Variants Installation

148mm Variants Installation

Installation of the AUTOMATIQ App

System Configuration – OEM

System Configuration – Mandatory

System Configuration – Registration

Assembly of the AUTOMATIQ Controller

CLiQ Pure Controller Assembly

CLiQ Plus Controller Assembly

CLiQ Pro Controller Assembly

Setup of the CLIQ Pure Controller

Setup of the CLIQ Plus Controller

Setup of the CLIQ Pro Controller

Setup of Integrated Systems

Integrated System Calibration (Bosch Intuvia/Nyon)

Bosch Intuvia Calibration

Procedure for calibrating the system with Bosch Intuvia display.

Bosch Nyon Calibration

Procedure for calibrating the system with Bosch Nyon display.

Integrated System Calibration (Bosch Kiox/Flyer Fit)

Bosch Kiox Calibration

Procedure for calibrating the system with Bosch Kiox display.

Flyer Fit Calibration

Procedure for calibrating the system with Flyer Fit display.

Troubleshooting

Assembly Torque Specifications

Care and Maintenance: Controller Cables

Care and Maintenance: Freewheel Replacement

Care and Maintenance: Brake Configurations

Disassembly of Rear Wheel (Manual Variants)

Disassembly of Rear Wheel (AUTOMATIQ Variants)

Reset CVP to Full Overdrive