To Next PageTo Next Page
Need help?Do you have a question about the enware TWYFORD Series and is the answer not in the manual?
Flush pipe connection details: 53-55mm diameter, requires 40mm European Kee Seal.
Specifies the outlet connection as DN100 DWV PVC Pan Collar.
Instructions to determine the correct positioning and layout for the toilet pan.
Details the extended spigot outlet and its connection requirements within wall cavities or infills.
Details the supplied floor fixing kit and requirements for secure bracket installation.
Steps for marking, drilling, attaching brackets, fixing the pan, and tightening screws correctly.
Instructions for fitting the supplied white screw cover caps for a finished look.
Connect waste, inspect for leaks, and ensure the floor surface is clean and dry before sealing.
Apply sealant to the pan base, floor, and infill contact points for a watertight seal.
Procedure for reporting defects, providing proof of purchase, and submitting warranty claims.
Conditions that invalidate the warranty, including improper installation or use.
Details other liabilities, non-excludable rights, and consumer guarantees under Australian law.
General| Brand | enware |
|---|---|
| Series | TWYFORD |
| Category | Toilets |
| Material | Vitreous China |
| Water Consumption (Full Flush) | 4.5L |
| Water Consumption (Half Flush) | 3L |
| Trap Type | S-Trap |
| Seat Type | Soft Close |
| Warranty | 10 years |
