Enwork Expanse - Base Assembly; Baseplate and Bottom Cover Assembly; Base Leg to Baseplate Connection; Top Plate Assembly to Base

5TI0075 - Expanse Table Installation Instructions
Assemble (4)Glides into the Baseplate.
Assemble the Inside Base Bottom
Cover using (3) 25-20 Nuts.
While standing on the base plate, Line up the connection
holes of the Top Plate Assembly with the Base Leg
assembly and attach using (8).375-16 x 1.25" bolts.
Note: Once the base is full assembled, place the provided
Kickstand under the assembly to keep it from falling forward.
Line up the Base Leg connection holes
with the holes on the Base Plate. Secure
together with (4).375-16 x 1.25" bolts.
Note: The angles cut into the attachment
plates should be facing the back.
3.1
3.3
3.2
3 — BASE ASSEMBLY
2x
2x
2x
When the base assemblies are completed,
place them in there nal position.
3.4