Safety precautions
Cleaning
Others
Disconnect the power cord before cleaning.
Do not spray water directly onto the power
cord, do not clean it with benzene or thinner.
This may cause electric shock, fire or
damage to this product.
Be sure to dry water thoroughly on and
around the power cord and on the prong
before reconnecting to the electrical
outlet.
Do not spray water onto the machine directly.
use a damp cloth to clean the outside casing.
Never wet or clean inside of the machine.
Otherwise, a short circuit or electric shock may
occur. (In the case where the LCD gets
contaminated, clean it with a damp cloth.)
When moving the machine to another
place, do not drag the machine by the
power cord, this may cause electric
shock or fire.
Do not disassemble or refurbish this
product at your discretion.
Otherwise, electric shock or damage
to the product may occur
(voiding warranty).
Use purified or filtered water,
(not alkaline or acidic water),
for fishtanks and bowls.
ྜྷƤǦƤ
ȋȌǤ
ྞƤǤ
ྟƤ
ƤǤ
ྠƪǤ
ྡƤǡ
ƤƤǤ
ǡ
ǤƤǡ
Ǥ
Filter Replacement
To Next Page
Loading...