47
Electrical installation
6.2 Establishing an electrical connection
1. Option 1: connect the optionally available button for remote control to terminals F.
2. Option 2: if required, you can connect 2 devices, such as a fan or a light, up to the max. power
consumption of 2.5 A to 230 V.
3. Finally, insert the shockproof plug into a plug and the mill wheel is ready for operation.
Taster/
blau/blue
rot/red
weiß/white
3
~
M
1 2 3
1 2 4
230V~
Schaltbox Steuerung/
3
Netz/mains
Licht/light
Lüfter/fan
4
switch-key
4
switch box control
3
A
B
A. Control unit
B. Remote control button (optional)
To Next Page
Loading...