Auto off function
The auto off function only works when the scale is powered by batteries.
If it the scale is powered by USB or by using AC/DC adapter, the scale will not auto off.
The auto off function can be configured or disabled by following the instructions below.
1. Start the scale and long press TARE key.
2. Then press Tare key to choose the mode you like.
5 means auto power off in 5 minutes without any operation.
3 means auto power off in 3 minutes.
1 means auto off in 1 minute.
- means the scale will not auto off.
3. Press MODE key to save setting.
To Previous Page
Loading...