Epever WiFi 2.4G User Manual

HUIZHOU EPEVER TECHNOLOGY CO., LTD TEL: +86-752-3889706 Website: www.epever.com
1 2
WiFi 2.4G Adapter
EPEVER WiFi 2.4G RJ45 A
EPEVER WiFi 2.4G DB9 B
1. Overview
Through a local WiFi 2.4G network, the WiFi 2.4G adapter can transmit
all operational data from the EPEVER solar controller, inverter, or
inverter/charger to the EPEVER cloud server in real-time. Users can
remotely monitor the connected devices and program parameters via the
EPEVER server, mobile APP, or the large screen.
Features:
 Applicable to EPEVER controllers, inverters, or inverter/charger with
RJ45, DB9 interfaces
 Use immediately after connecting; easy and convenient operation
 Directly powered by the communication port
 Up to 30 meters of communication distance
 Support the “Local” and “EPEVER Cloud” working mode.
 One key to restoring the factory settings
2. Appearance
2.1 EPEVER WiFi 2.4G RJ45 A
 Interface instruction
No.
Name
Instruction
❶
RJ45 port
Connect to the solar controller, inverter, or
inverter/charger
❷
Reload button
One key to restoring factory settings
Note: Long press the Reload button with a
sharp object when the terminal’s power is on.
The Link indicator flashes twice quickly, and
the factory settings are restored.
❸
Link indicator
Indicate the communication status
❹
Power indicator
Indicate the power status
 Indicator instruction
Indicator
Status
Instruction
Link
indicator
ON solid in green
Connect to the WiFi
OFF
Not connect to the WiFi
Fast flashing in green
Reset to the factory mode
Power
indicator
ON solid in green
Normal powered on
OFF
Not powered on
2.2 EPEVER WiFi 2.4G DB9 B
 Interface instruction
No.
Name
Instruction
❶
DB9 male
connector
Connect to the solar controller, inverter, or
inverter/charger
❷
Antenna
Enhance the signal transmission
❸
Reset button
One key to restoring factory settings
Note: Long press the Reset button through
the KEY hole with a sharp object when the
terminal’s power is on. The indicator light
flashes twice quickly, and the factory
settings are restored.
❹
Network
Indicator
Indicate the communication status
(Observe the indicator status through the
KEY hole)
❺
Power Indicator
Indicate the power status
 Connect the EPEVER WiFi 2.4G DB9 B to the solar controller, inverter,
or inverter/charger by a DB-9 female connector. The wire sequence and
name of the DB9 female connector are shown below.
No.
Name
Instruction
No.
Name
Instruction
1
NC
Floating
6
NC
Floating
2
NC
Floating
7
RS485-A
RS485-A
3
VCC2
Power2
(12V/200mA)
8
RS485-B
RS485-B
4
GND2
Power GND2
9
VCC1
Power1
(5V/400mA)
5
GND1
Power GND1
 Indicator instruction
Indicator
Status
Instruction
Network Indicator
ON solid in green
Connect to the WiFi
OFF
Not connect to the WiFi
Fast flashing in
green
Reset to the factory mode
Power Indicator
ON solid in green
Normal powered on
OFF
Not powered on
3. Specifications
Model
Parameters
EPEVER WiFi 2.4G
RJ45 A
EPEVER WiFi 2.4G
DB9 B
Input voltage
5VDC
Power consumption
Peak emission: 5V@100mA; Idle: 5V@40mA
Enclosure
IP54
Communication method
RS485
Com. parameters
9600 ~ 115200bps, 8N1
Working Frequency
2.4~2.4835GHz
Antenna gain
2.5dBi~ 5dBi
Environment temp.
-40℃~ 85℃
Com. standard
EPEVER general communication standardV1-1.0
Com. protocol
EPEVER IoT communication protocol V1.1
Com. port
RJ45
DB9
Dimension
66.24* 51.28* 23.76mm
101.2* 64* 26mm
Net weight
38.5g
39.5g
4. Disclaimers
The warranty does not apply to the following conditions:
 Damage caused by improper use or inappropriate environment.
 The parameter setting exceeds the WiFi terminal’s limit.
 Damage caused by working temperature exceeds the rated range.
 Unauthorized dismantles or attempted repairs.
 Damage caused by force majeure.
 Damage occurred during transportation or handling.
※ Thanks for selecting the WiFi transmission terminal; please
read this manual carefully before using the product.
※ Please keep this manual for future reference.

Epever WiFi 2.4G Specifications

General

Brand	Epever
Model	WiFi 2.4G
Category	Adapter
Language	English