2.2.3 Ventilation
Maintenance and storage areas shall be properly ventilated to avoid fire hazards in accordance with applicable
fire codes and ordinances.
2.2.4 Maintenance Safety Procedures
All maintenance shall be performed in accordance with the manufacturer’s recommended safety procedures as
outlined in the manufacturer’s operation and service manuals. The following list of recommended safety
procedures are general in nature and in no way supersede the manufacturer’s specific instructions.
2.2.4.1 Following manufacturer’s instructions for immobilizing EPIC CART before beginning any
maintenance.
2.2.4.2 Block chassis before working underneath EPIC CART.
2.2.4.3 Before performing any maintenance on an electric EPIC CART, disable the electrical system in
accordance with the manufacturer’s instructions.
2.2.4.4 Use only properly insulated tools when working on electrically powered EPIC CART or around
batteries.
2.2.4.5 The controlling party shall not perform any modification or addition which affects capacity or safe
operation or make any change not in accordance with owner’s manual without the manufacturer’s
prior written authorization. Where authorized modifications have been made, the controlling party
shall ensure that capacity, operation, warning and maintenance instruction plates, tags or decals are
changed accordingly.
3. OPERATING SAFETY RULES AND PRACTICES
3.1 Operator Qualifications
3.1.1 Only authorized persons shall be allowed to operate EPIC CART, it is recommended that no persons
be allowed to operate EPIC CART except those persons who possess a valid motor vehicle driver’s
license.
3.1.2 The controlling party shall display the operation and safety instructions as recommended by the EPIC
CART manufacturers and the safety rules in a conspicuous place near the EPIC CART rental area or
EPIC CART pick-up area. It is also recommended, as with all motor vehicles, that the warning “Do not
operate EPIC CART when under the influence of alcohol or drugs.” Be posted in a conspicuous
location.
To Next Page
Loading...