Do you have a question about the Epiphone Valve Junior and is the answer not in the manual?
Type | Tube Amplifier |
---|---|
Power Output | 5 Watts |
Preamp Tubes | 1 x 12AX7 |
Power Tubes | 1 x EL84 |
Controls | Volume |
Inputs | 1 x 1/4" Instrument |
Outputs | 1 x 1/4" Speaker Output |
Speaker Output | 8 Ohm |
Explains hazard symbols like lightning bolt and exclamation mark, and compliance marks like CE and C-US.
Lists numbered instructions for safe use, including water avoidance, cleaning, ventilation, and grounding.
Details the Class A, 5-watt Valve Junior amplifier, including inputs, controls, speaker, and tubes.
Details the Class A, 5-watt Valve Special DSP amplifier with digital processing and reverb.
Details the Class AB, 15-watt Valve Standard DSP amplifier with digital processing and reverb.
Illustrates and labels the controls and connections on the front and rear panels of the Valve Junior.
Illustrates and labels the controls and connections on the front and rear panels of the Valve Special.
Illustrates and labels the controls and connections on the front and rear panels of the Valve Standard.
Describes DSP functions for Valve Special and Standard models, including Chorus, Flanger, and Delay presets.
Explains speaker output connections and the function of the DSP Mute footswitch.
Details how to turn the amplifier on/off and the purpose of the standby switch for tube warm-up.
Outlines the terms, limitations, and exclusions of the amplifier's 5-year limited warranty.