Connection Method
Bluetooth Mode
Turn the •mode switch' to the BT position. If no host has been paired before, the keyboard will automatically enter the
code-matching state .( if you have paired the host before, you will directly connect back,The indicator light flashes slowly;
if the connection fails for 3 seconds, the keyboard enters the Bluetooth sleep state; Ifthe connection is successful, the
indicator light will be on for 3 seconds and then the original state of the button backlight will be restored.)
000
• Touch the button to switch to the corresponding Bluetooth device. The light of the
Multl-devlce connection:
corresponding button flashes slowly for 3 seconds to indicate the reconnection. After the reconnection is successful, the
corresponding button light is always on to indicate; the reconnection fails and the backlight is off.
Long press for 2 seconds to pair the corresponding device, the corresponding button light flashes quickly to indicate the
code pairing, after the code pairing is successful, the corresponding button light is always on to indicate; when the
connection fails, the backlight goes out.
USB Wired Connection Mode
Tum the •mode switch• to the USB position to realize the USBwired connection mode and tum off the battery power supply
at the same time. (The battery can be charged by connecting the USBin any mode, until the battery is fully charged)
To Next Page
Loading...
