MACOS SHORTCUTS
FUNCTION KEY COMBINATIONS
LIGHT EFFECTS
Toggle the switch in the back to make sure that the keyboard is under
the wireless mode:
PAIRING BLUETOOTH TRIPLEMODE VERSION ONLY
1. Hold Fn+1!/2@/3# (or 1!/2”/3£ in ISO layout) for 3-5 seconds till the indicators flashes fast in
blue, the keyboard is ready to pair.
2. Turn on your Bluetooth device and find “TH96 BT5.0” or “TH96 BT3.0”, then connect. When
the keyboard is connected to the Bluetooth device, the light on the 1!/2@/3# (or 1!/2”/3£ in
ISO layout) key stops flashing and the connection is done.
3. Press Fn+1!/2@/3# (or 1!/2”/3£ in ISO layout) to toggle between the Bluetooth devices 1/2/3.
WIRED MODE
Toggle the switch to the wired mode, press Fn+5% till the 5% key lights up in white, and the
keyboard enters to the wired mode successfully.
CHECK BATTERY TRIPLEMODE VERSION ONLY
Hold Fn+B, the keys from 1! to 0) lights up to show the battery percentage; for example, if the
keys from 1! to 6^ light up when holding Fn+B, it means that the battery life is currently 60%; if
keys of 1!-0) light up, battery life is 100%.
CHECK LAYER AND MODE
Hold Fn+Spacebar, the indicators of Z/X/C and 1/2/3/4/5 light up to show at which layer and which
mode the keyboard is; for example, if the keys of X and 3 light up when holding Fn+Spacebar, it
means that the keyboard is in layer 2 and under the wireless mode and connected to BT3 device.
PAIRING WIRELESS 2.4GHZ TRIPLEMODE VERSION ONLY
1. Hold Fn+4$ for for 3-5 seconds till the light flashes fast in green, the keyboard is ready to pair.
2. Insert the 2.4G dongle to your device, the 4$ key stops flashing green and the connection is done.
Toggle the switch in the back to make sure that the keyboard is under
the wireless mode:
S P E C S
MODEL:
KEYS AMOUNT:
STRUCTURE:
STABILIZER TYPE:
PCB TYPE:
BATTERY CAPACITY:
CONNECTIVITY:
ANTI-GHOST KEY:
POLLING RATE:
COMPATIBILITY:
DIMENSION:
WEIGHT:
To Next Page
Loading...
