Epomaker TH96 PRO - Connectivity and Modes; Wireless Pairing Guide; Wired Mode and Battery Check; Product Specifications

EN
WIN D O W S S H O RTC U T S
FN + F1
Screen Brightness -
Fn + F2
Screen Brightness +
Fn + F3
Task
Fn + F4
Explorer
Fn + F5
Mail
Fn + F6
Homepage
Fn + F7
Previous Track
Fn + F8
Play/Pause
Fn + F9
Next Track
Fn + F10
Mute
Fn + F11
Volume -
Fn + F12
Volume +
Fn + Win
Lock/Unlock Win Key
FN + F1
Screen Brightness -
Fn + F2
Screen Brightness +
Fn + F3
Task
Fn + F4
Search
Fn + F5
Mic
Fn + F6
Sleep
Fn + F7
Previous Track
Fn + F8
Play/Pause
Fn + F9
Next Track
Fn + F10
Mute
Fn + F11
Volume -
Fn + F12
Volume +
FN+Esc
(Hold 3s)
Reset the Keyboardt
Fn + 1!
Short Press to Switch to BT1;
Long Press to Pair Devices
Short Press to Switch to BT2;
Long Press to Pair Devices
Fn + 2@
Short Press to Switch to BT3;
Long Press to Pair Devices
Fn + 3#
Fn + 4$
Short Press to Switch to 2.4G Mode;
Long Press to Pair Devices
Fn + 5%
Wired Mode
FN+ B
Battery Check
Fn + /
Numlock
Fn+Z/X/C
Switch among the Layers 1/2/3
Fn+Spacebar
(Hold)
Check Layer & Mode
Fn + Backspace
Turn On/Off Backlights
Fn + \|
Toggle RGB Effects
Fn + P
Toggle RGB Colors
Fn + D
Change Dynamic RGB
Directions
Fn + ↓
Backlights Brightness -
Fn + ↑
Backlights Brightness +
Fn + ←
Backlights Speed -
Fn + →
Backlights Speed +
MACOS SHORTCUTS
FUNCTION KEY COMBINATIONS
LIGHT EFFECTS
Toggle the switch in the back to make sure that the keyboard is under
the wireless mode:
PAIRING BLUETOOTH TRIPLEMODE VERSION ONLY
1. Hold Fn+1!/2@/3# (or 1!/2”/3£ in ISO layout) for 3-5 seconds till the indicators flashes fast in
blue, the keyboard is ready to pair.
2. Turn on your Bluetooth device and find “TH96 BT5.0” or “TH96 BT3.0”, then connect. When
the keyboard is connected to the Bluetooth device, the light on the 1!/2@/3# (or 1!/2”/3£ in
ISO layout) key stops flashing and the connection is done.
3. Press Fn+1!/2@/3# (or 1!/2”/3£ in ISO layout) to toggle between the Bluetooth devices 1/2/3.
WIRED MODE
Toggle the switch to the wired mode, press Fn+5% till the 5% key lights up in white, and the
keyboard enters to the wired mode successfully.
CHECK BATTERY TRIPLEMODE VERSION ONLY
Hold Fn+B, the keys from 1! to 0) lights up to show the battery percentage; for example, if the
keys from 1! to 6^ light up when holding Fn+B, it means that the battery life is currently 60%; if
keys of 1!-0) light up, battery life is 100%.
CHECK LAYER AND MODE
Hold Fn+Spacebar, the indicators of Z/X/C and 1/2/3/4/5 light up to show at which layer and which
mode the keyboard is; for example, if the keys of X and 3 light up when holding Fn+Spacebar, it
means that the keyboard is in layer 2 and under the wireless mode and connected to BT3 device.
PAIRING WIRELESS 2.4GHZ TRIPLEMODE VERSION ONLY
1. Hold Fn+4$ for for 3-5 seconds till the light flashes fast in green, the keyboard is ready to pair.
2. Insert the 2.4G dongle to your device, the 4$ key stops flashing green and the connection is done.
Toggle the switch in the back to make sure that the keyboard is under
the wireless mode:
S P E C S
MODEL:
KEYS AMOUNT:
STRUCTURE:
STABILIZER TYPE:
PCB TYPE:
BATTERY CAPACITY:
CONNECTIVITY:
ANTI-GHOST KEY:
POLLING RATE:
COMPATIBILITY:
DIMENSION:
WEIGHT:
EPOMAKER TH96 PRO
95Keys + 1 Knob
Gasket mount
Screw-in Stabilizer for Space-bar, others are plate-mounted stabilizers
3/5-pin HotswapPCB
6000mAh (Triple-mode version only)
Type-CWired, 2.4&BluetoothWireless (Triple-mode version only)
NKROin all modes
1000hz inType-C Wired & 2.4G modes
WINDOWS/MAC
323x113 x25mm
Around0.8kg
QMK/VIA:
Supportable in the Wired version
LED:
South-facing LEDs