SPECIFICATION
EPIC 1
Power Handling 100 Watts unclipped speech and music
Frequency Range 51 Hz - 25 kHz
Impedance 4 Ohm nominal
Sensitivity 88dB/2.83V@1m
Amplifier Compatibility 20 - 100 Watts
Positioning Not less than 10 cm (4”) from rear wall
Tweeter Epos 25mm soft dome with high-temperature voice coil,
ferrofluid cooling and neodymium magnet system.
Magnetically shielded
Bass/Midrange Driver Epos 150mm with 25mm high-temperature voice coil
and polypropylene cone. Magnetically shielded
Crossover Bass and tweeter crossover with 2nd order filters.
Tweeter network uses metal oxide resistors,
polypropylene film capacitor and air-core inductor.
Woofer network features a large core laminated iron
inductor and polypropylene film by-pass capacitor
Terminal Panel Gold plated and bi-wirable. Can be single or double
wired by removing shorting links provided
Internal wiring 18 AWG stranded cable.
Cabinet 18mm MDF wrap and front baffle internally braced
Grilles Removable ‘audiophile’ grille as standard. Alternative
cloth covered grilles packed as an accessory. Grille
removal tool included
Finish Cherry or Black Ash vinyl veneer
Size - HxWxD - mm / ins 310 x 185 x 245 / 12.2 x 7.2 x 9.7
Weight 5.9 kg / 13 lb per single speaker
14.2 kg / 32.2 lb per carton
Packaged One pair per carton
E&OE
Page Six
To Next Page
Loading...
Need help?
General
