SPECIFICATION
EPIC 5
Power Handling 200 Watts unclipped speech and music
Frequency Range 45 Hz - 25 kHz
Impedance 4 Ohm nominal
Sensitivity 92dB/2.83V@1m
Amplifier Compatibility 20 - 200 Watts
Positioning Not less than 10 cm (4”) from rear wall
Tweeter Epos 25mm soft dome with high-temperature voice coil,
ferrofluid cooling and neodymium magnet system.
Magnetically shielded
Bass & Bass/Midrange Drivers Epos 179mm with 25mm high-temperature voice coil
and polypropylene cone.
Crossover Bass units and tweeter crossover with 2nd order filters.
Tweeter network uses metal oxide resistor,
polypropylene film capacitor and air-core inductor.
Woofer and mid-woofer networks feature large core
laminated iron inductors and polypropylene film by-
pass capacitors
Terminal Panel Gold plated and bi-wirable. Can be single or double
wired by removing shorting links provided
Internal wiring 18 AWG stranded cable.
Cabinet 18mm MDF wrap and front baffle internally braced
Grilles Removable ‘audiophile’ grille as standard. Alternative
cloth covered grilles packed as an accessory. Grille
removal tool included
Finish Cherry or Black Ash vinyl veneer
Size - HxWxD - mm / ins 915 x 210 x 320 / 36 x 8.3 x 12.6 (Cabinet only)
980 x 286 x 380 (Including plinth and spikes)
Weight 19.7 kg / 43.4 lb per single speaker
23 kg / 52 lb per carton
Packaged One speaker per carton
E&OE
Page Eight
To Previous Page
Loading...
Need help?
General
