2
Mount near
AC Outlet
NOTE: For models with additional bonus tools, connect
smaller attachments to the extension hose and the bendable
adapter to keep all parts together and organized.
WALL MOUNT STORAGE BRACKET INSTRUCTIONS
Dry wall may require
anchors, (not included)
55”-60” Up
to hang stick vacuum
with accessories
Wall Mount Holes
7.375”
(187mm)
The ePro Select Cordless Vacuum System comes with 6 Bonus
Accessory Tools and a convenient wall-mount storage stand.
Find a wall space location close to an electrical outlet without
any obstructions such as windows or shelving.
With the vacuum connected to the Motorized Brush Roller
and Extension Rod and Flexible Bend Tool, position the
assembled vacuum against the wall where it will be stored
and mark the holes of the wall mount bracket at the right
height to store the vacuum in the upright position.
Use a Phillips screwdriver (not included) to install the wall
mount bracket with the screws provided. Make sure to mark
mounting holes using the wall mounting holes on bracket.
Use the vertical storage pipes to the left, right and
bottom of wall mount bracket to snap in 5 accessory tools.
Set the assembled stick vacuum in the middle of the
wall-mounted storage bracket and plug in charging adapter
with the battery installed into a nearby power outlet. The
detachable battery can also be charged on a flat surface near
an outlet when removed from the vacuum.
To Next Page
Loading...