ePropulsion eLite Quick Start

3 Installation and Removal
Motor Installation
Step 1: Pull out or rotate the tiller
adjustment toggle to unfold the tiller.
Step 2: Hold the outboard motor with both
hands and align the quick-release mount
with the clamp bracket damping shaft, then
slowly lower the motor into place.
Motor Removal
Step1: Press the quick-release button to release.
Step2: Hold the outboard motor with both hands and slowly lift it upwards.
4 Operation
Start the Outboard Motor
Step 1: Attach the kill switch wristband to
your wrist or life jacket.
Step 3: Press and hold the power button for
2 seconds to turn on the outboard motor.
Step 2: Insert the kill switch into the kill
switch hole.
Step 4: Turn the throttle handle to move
forward or backward.
Transom thickness range:
23mm-70mm
0°
45°
90°
-90°
Quick Release
Button
8°
17°
26°
75
Transom thickness range:
23mm-70mm
0°
45°
90°
-90°
Quick Release
Button
8°
17°
26°
75
Transom thickness range:
23mm-70mm
0°
45°
90°
-90°
Quick Release
Button
8°
17°
26°
75
Transom thickness range:
23mm-70mm
0°
45°
90°
-90°
Quick Release
Button
8°
17°
26°
75
Transom thickness range:
23mm-70mm
0°
45°
90°
-90°
Quick Release
Button
8°
17°
26°
75
Transom thickness range:
23mm-70mm
0°
45°
90°
-90°
Quick Release
Button
8°
17°
26°
75

ePropulsion eLite Specifications

General

Brand	ePropulsion
Model	eLite
Category	Outboard Motor
Language	English