34
Envelopes
You can load up to 10 envelopes at a time, flap
edge first and printable side up. Place them against
the right edge guide and slide the left edge guide
against them.
(You’ll get better results if you press each envelope
flat before loading it, or load one envelope at a
time.)
Set the thickness lever to the
+ position when you print on
envelopes or other thick media.
(Return the lever to the
0 position before you print on
regular paper.)
Select Plain paper as the Media Type setting and choose the correct envelope size as
the Paper Size setting.
If the printing smears or you have banding (light lines), try turning off High Speed
printing in the Advanced dialog box. (See page 28 for instructions on accessing the
dialog box.)
Lever position for
envelopes and thick paper
To Next Page
Loading...
