Specifications
Epson DM
-
D805 Pole Display Kit
General Display method/color Vacuum fluorescent display/Green (505mm)
Number of characters 40 (20 columns x 2 lines)
Brightness 690 cd/m
2
Buffer size 80 bytes
Character font 5 x 7 dot matrix, cursor
Character type Alphanumeric: 95, International characters: 37,
Graphic characters: 128 x 12 pages
Character size/pitch 3.5 x 5.0mm/5.2mm
Download characters 95 characters
Case color ECW (Epson Cool White) and EDG (Epson Dark Gray)
Height 2.72” (69mm) DM-D110 head
12.95” (329mm) DM-D110 head with DP-505 base
17.68” (449mm) DM-D110 head with DP-505 base and extension strut
Interface RS-232 serial
Connection Direct connection
Baud rate 2,400~115,200 bps
Emulations Aedex, EMAX, IEEE, Logic Controls and NCR*
Reliability MTBF 20,000 hours
Power AC adapter 12VDC, 500mA (center positive, sleeve negative)
Safety EMC standards VCCI class A, FCC class A, CE marking
Safety standards UL/CSA/TÜV (EN60950)
The kit includes an extension cable with an RJ-45
to 9-pin serial interface adapter to directly connect
to a free serial port on a host system.
*For additional emulation requirements, please contact your local Epson sales representative.
The All-in-one, Direct-connect
Customer Display Solution
Epson America, Inc. • 3840 Kilroy Airport Way • Long Beach, CA 90806 • (562) 290-5304 • http://pos.epson.com
© 2002 Epson America, Inc. Epson is a registered trademark of Seiko Epson Corporation. All other trademarks are the property of
their respective owners. Specifications are subject to change without notice.
SD-DSD805A
To Previous Page
Loading...
