Epson DREAMIO EH-DM3 - Changing the Angle; Carrying out Operations from the Playback Information Screen

37
Advanced Operations
For discs that have been recorded with multiple camera angles, you can switch
from the main angle to a different camera angle of your preference, such as
from above, or from the right, during playback.
1
Press during playback.
The current angle is displayed on the screen.
2
Select the desired angle by pressing repeatedly.
You can check the current playback status and change your settings without
stopping the play.
1
Press during playback.
The projected image is reduced, and the following information screen is
displayed under it.
• When you are using a , the playback time is switched as
follows each time you press : “Single Remain” _ “Total
Elapsed” _ “Total Remain”_ “Single Elapsed.
• When you are using a , the playback time is
switched as follows each time you press : “Total Elapsed” _
“Total Remain” _ “-:--:--” (WMA does not support for Track Time)
You can also switch from the playback information screen. sp. 37
Changing the angle
Carrying out operations from the playback information screen
S
et t
h
e [Funct
i
on] pos
i
t
i
on
b
e
f
ore
performing operations