Epson dreamio EMP-TW2000 - Page 54

52
Specifications
■ Angle of tilt
If you set the projector higher than 15º, it could damage the projector and cause an accident.
■ RS-232C cable layout
• Connector shape : D-Sub 9-pin (male)
• Projector input connector : RS-232C
<At projector>
(PC serial cable) <At computer>
Signal Function
GND 5 5 GND
GND Signal wire earth
RD 2 3 TD
TD Transmit data
TD 3 2 RD
RD Receive data
DTR 4 6 DSR
DSR Data set ready
DSR 6 4 DTR
DTR Data terminal ready
<At projector>
<At computer>