Manage Certificates menu
Submenu Function
Client Certificate
Displays the Issued to, Issued by, and Validity period
information set in the stored client certificate. It is blank if the
certificate is not set. You need to set Client Certificate when
WPA/WPA2-EAP is selected in Security, and PEAP-TLS or
EAP-TLS are selected in EAP Method.
Select Clear to delete the stored certificate.
CA certificate
Displays the Issued to, Issued by, and Validity period
information set in the stored CA certificate. It is blank if the
certificate is not set. You need to set CA certificate when
WPA/WPA2-EAP is selected in Security, when verifying the
authentication server certificate.
Select Clear to delete the stored certificate.
Self-signed Cer‐
tificate
(This item can only be set when Secure HTTP is set to On.)
The Issued to, Issued by, and Validity period information on
the certificate maintained by the server function in the projector
is displayed. This information is not displayed if Web Server
Certificate is set.
Select Refresh to update the self-signed certificate.
Submenu Function
Web Server Cer‐
tificate
(This item can only be set when Secure HTTP is set to On.)
The Issued to, Issued by, and Validity period information on
the certificate set in the projector is displayed. This information
is not displayed when a Self-signed Certificate is set.
Select Clear to delete the stored certificate.
a
• Web Control is used to set certificates.
s "Setting Certificates" p.77
• You can also install digital certificates on the projector from a USB
storage device. However, if you install a certificate from both a USB
storage device and the network, it may not be installed correctly.
List of Functions
107
To Next Page
Loading...
