Opera‐
tion
Combinations Descriptions
ID selected with remote
control: 1
Possible
Projector ID: 1 When 0 is selected with the
remote control, you can
operate the projector from
the remote control regardless
of the Projector ID.
ID selected with remote
control: 0
Not possi‐
ble
Projector ID: 1 When the Projector ID and
the ID selected with the
remote control do not match,
you cannot operate the
projector from the remote
control.
ID selected with remote
control: 3
Setting the projector ID
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.88
Using the remote control Using the control panel
b
Select Projector ID from Extended.
c
Select the ID you want to set, and then press the [Enter] button.
d
Press the [Menu] button to finish making settings.
Projection Functions
63
To Next Page
Loading...
