You can use the projector's remote control as a pointer to help you focus
your audience on important information on the screen. The default pointer
shape is an arrow. You can change the shape in the Pointer Shape setting
in the projector's Settings menu.
a
Press the [Pointer] button on the remote control.
b
Use the arrow buttons to move the pointer on the screen. To
move the pointer diagonally, press any pair of adjacent arrow
buttons at the same time.
c
Press [Esc] to remove the pointer from the screen.
Related Links
• "Adjusting Projector Features" p.69
• "Projector Feature Settings - Settings Menu" p.137
Using the Remote Control as a Pointer
86
To Next Page
Loading...
