Epson EB-2140W User Manual

Wireless Network Projection
104
c
Remove the screw securing the wireless LAN module stopper and
remove the stopper.
d
Insert the wireless LAN module into the port.
e
Replace the wireless LAN module stopper, and secure it using the screw
you removed.
f
Close the air filter cover.
g
Plug in and turn on the projector.
Installing the Wireless LAN Module into the Rear
USB-A Port
To use the projector over a wireless network, install the Epson 802.11b/g/n
wireless LAN module (EB-2140W/EB-2040). Do not install any other type of
wireless LAN module.
Attention
Never remove the module while its indicator is blue or flashing, or while you are
projecting wirelessly. This could damage the module or lose data.

Epson EB-2140W Specifications

General

Brand	Epson
Model	EB-2140W
Category	Projector
Language	English