6
1 Package Contents
s Page 7
2 Specifications
s Page 8
3 Connecting Devices
s Page 9
4 Projection Distance Table
s Page 10
5 Installation Procedure
s Page 13
(1) Install the wall plate on the wall
(2) Determine the projection distance and pull out the slider
(3) Attach the setting plate to the wall plate
(4) Secure the projector to the setting plate
(5) Connect the power cable and other cables to the projector
6 Adjusting the Projection Screen
s Page 17
(1) Turn on the projector
(2) Change the aspect ratio
(3) Display the test pattern
(4) Adjust the focus
(5) Use the top adjustment dial to adjust the vertical tilt
(6) Use the right adjustment dial to adjust the horizontal rotation
(7) Use the left adjustment dial to adjust the horizontal roll
(8) Adjust the vertical slide
(9) Adjust the forward/backward slide
(10) Turn off the display of the test pattern
7 Attaching the Covers
s Page 21
(1) Attach the wall plate cover and end cap
(2) Attach the cable cover to the projector
To Next Page
Loading...
Need help?
General
