b
Press the following buttons to correct keystone distortion.
Press the [
w] or [v] buttons to correct vertical distortion.
Press the [Wide] or [Tele] buttons to correct horizontal distortion.
a
You can set H/V-Keystone from the Configuration menu.
s Settings - Keystone - H/V-Keystone p.131
Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.125
Using Remote Control Using the Control Panel
b
Select Keystone from Settings.
Adjusting Projected Images
53
To Next Page
Loading...
