The following screen appears.
e
Adjust the focus, if necessary, by opening the air filter cover on
the side of the projector and sliding the focus lever.
f
Press the [Enter] button to select Yes.
A flashing green circle appears in the upper left corner of your
projected image.
g
Touch and hold the center of the circle with your finger until the
circle disappears and the another circle appears, then release it.
a
• For the most accurate calibration, make sure you touch the
center of the circle.
• Do not touch with anything else except the tip of your
finger.
h
Touch the center of the next circle with your finger, then repeat.
When you get to the bottom of the column, the next circle
appears at the top of a new column.
Using Your Finger for Interactive Touch Operations (EB-595Wi only)
84
To Next Page
Loading...
