a
• When the selected device is disconnected from the projector,
the selected user's screen is not projected and the user list is
automatically updated.
• While the user selection screen is displayed, you cannot do
the following:
- Select a different image source
- Use other interactive features
- Control the projector from the projector control toolbar
- Connect to multiple projectors
- Hear sound from the projector (it is turned off temporarily)
- Change the settings using the projector's configuration menu
- Project an image using EasyMP Multi PC Projection or
Epson iProjection
You see the selected user's screen image.
When you change the user, repeat these steps.
a
• You cannot access the user selection screen when connecting to
multiple projectors by using EasyMP Multi PC Projection and
projecting the same image (mirroring).
• If the interactive features do not work, you can return to the
previous screen by pressing the [Esc] button on the remote control
or the control panel.
Interacting with the Screen
91
To Next Page
Loading...
Need help?
General
