Projecting Two Images Simultaneously
114
Split Screen Projection Restrictions
Operating restrictions
The following operations cannot be performed during split screen projection.
• Setting the projector's menu
• E-Zoom
• Switching the aspect mode (the aspect mode is set to Normal)
• Operations using the [User] button on the remote control
• Auto Iris
a
Help can only be displayed when no image signals are being input or
when an error or warning notification is displayed.
Image restrictions
• If you make adjustments such as Brightness, Contrast, Color Saturation,
Tint, and Sharpness in the projector's Image menu, you can apply them
only to the image on the left. Default adjustments are applied to the image
on the right. Adjustments that affect the entire projected image such as
Color Mode and Color Temp. are applied for both left and right images.
• Even if you make adjustments for Noise Reduction and Deinterlacing in
the projector's Image menu, Noise Reduction is set to 0 and Deinterlacing
is set to Off for the image on the right.
s Image > Image Enhancement > Noise Reduction
s Image > Advanced > Deinterlacing
• Even if you set Display Background to Logo in the projector's Extended
menu, the blue screen appears when no image signal is being input.
gg Related Links
• "Image Aspect Ratio" p.66
• "Color Mode" p.68
• "Input Signal Settings - Signal Menu" p.173
• "Projector Feature Settings - Settings Menu" p.175
• "Projector Setup Settings - Extended Menu" p.178
• "Zooming Images" p.122
• "Setting Auto Iris" p.68
To Next Page
Loading...
