Controlling the Volume with the Volume Buttons
58
The volume buttons control the projector's internal speaker system.
You can also control the volume of any external speakers you connected to
the projector.
You must adjust the volume separately for each connected input source.
a
Turn on the projector and start a presentation.
b
To lower or raise the volume, press the [Volume] buttons on the
control panel or remote control as shown.
a
The [Volume] buttons on the control panel are available only
with
EB‑2247U/EB‑2142W/EB‑2042/EB‑990U/EB‑980W/EB‑970/EB‑1
09W/EB‑108/EB‑107/EB‑W39/EB‑X39.
A volume gauge appears on the screen.
c
To set the volume to a specific level for an input source, select Volume
in the projector's Settings menu.
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may cause
hearing loss.
Always lower the volume before powering off, so that you can power on and then
gradually increase the volume.
gg Related Links
• "Projector Feature Settings - Settings Menu" p.129
To Next Page
Loading...
